如今市场上许多工程师在比较市场瓦的价格之后，都会用一个词来评价铝瓦的价格，那就是贵。然而，尽管如此，仍有一些工程师选择使用，综合比较下铝瓦优点巨多，根本抵挡不住其诱惑。
Nowadays, many engineers in the market will use one word to evaluate the price of aluminum tile after comparing the price of aluminum tile in the market, that is expensive. However, despite this, some engineers still choose to use it. Compared with the aluminum tile, it has many advantages and can't resist its temptation at all.
铝瓦的价格和它的厚度息息有关，目前市场上的两种瓦片分别为连体和分体，市面上普遍的厚度有1.0、1.2、1.5和2.0mm。
The price of aluminum tile is related to its thickness. At present, the two kinds of tiles on the market are conjoined and split respectively. The common thicknesses on the market are 1.0, 1.2, 1.5 and 2.0mm.
其价格基板厚度较大，价格较高。1.0与1.2的价格超过200，然后1.5和2.0的价格在300到400以上，那么，作为客户，又该如何选择？告诉你一个好主意：不管是哪一项，都要坚持按需求原则选择；
The thickness of the base plate is large and the price is high. The price of 1.0 and 1.2 is more than 200, and then the price of 1.5 and 2.0 is more than 300 to 400. Then, as a customer, how to choose? Tell you a good idea: no matter what it is, we should adhere to the principle of selecting according to needs;
若作为普通的古玩建筑，如古玩城、古玩街等，可根据您的预算，选用1.0、1.2的瓦。假如是庙宇屋顶，一般推荐的厚度为1.2、1.5，庙宇的位置一般较偏僻，普遍在山上，风势也大，1.0稍微有点薄；也有一些公共建筑物，如学校、旅馆、高铁车站及其它建筑物的顶棚，则选用1.2。
If it is an ordinary antique building, such as antique city and antique street, you can choose 1.0 and 1.2 watts according to your budget. If it is a temple roof, the generally recommended thickness is 1.2 and 1.5. The location of the temple is generally remote, generally on the mountain, the wind is also strong, and 1.0 is a little thin; For some public buildings, such as the roofs of schools, hotels, high-speed railway stations and other buildings, 1.2 is selected.
有些博物馆式屋顶厚度较大，拆掉的可能性较小，一般不会移动。所以，博物馆屋顶通常选用1.5-2.0厚度的铝瓦屋顶；除厚度选择外，接下来就是选材。屋顶瓦片有四种尺寸。按其宽、长可分为1号瓦、2号瓦、3号瓦和4号瓦。
Some museum roofs are thicker and less likely to be removed, and generally will not move. Therefore, the museum roof usually adopts 1.5-2.0 thick aluminum tile roof; In addition to thickness selection, the next step is material selection. Roof tiles come in four sizes. According to its width and length, it can be divided into No. 1 tile, No. 2 tile, No. 3 tile and No. 4 tile.
那我们该怎么选择屋顶呢？1号瓦基本用于脊瓦，需要特别大的屋顶也会用到一些，使用范围比较小。
So how do we choose the roof? No. 1 tile is basically used for ridge tile, and some are also used for particularly large roofs, with a relatively small scope of use.
2号瓦通常用在屋顶较高的屋顶上，2号瓦片比较有气氛，例如我们的一些庙宇屋顶，虽然屋顶并不特别高，但住宅、旅馆、学校、建筑物被广泛使用。
No. 2 tile is often used on the roof with high roof. No. 2 tile is more atmosphere. For example, some of our temple roofs are not particularly high, but houses, hotels, schools and buildings are widely used.
3号瓦更广泛用于庙宇或仿古建筑，高塔、围墙、亭台、景区改造、仿古街道改造等；只要屋顶不是特别高，几乎都可适用。
No. 3 tile is more widely used in temples or antique buildings, high towers, walls, pavilions, scenic spot reconstruction, antique street reconstruction, etc; As long as the roof is not particularly high, it can be applied almost.
4号瓦则用于部分小亭、庭院墙、低矮门楼，使用范围较小。
No. 4 tile is used for some small pavilions, courtyard walls and low gatehouses, with a small scope of use.
以上就是为大家介绍的有关仿古铝瓦的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以专业的态度,为您提供服务http://www.sdcgy.com
The above is the introduction of antique aluminum tile. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sdcgy.com
